Vibracrete and Precast Wall Installation in Cape Town
A vibracrete wall is made from slotted concrete posts and precast panels that slide in between them. We supply the lot and put it up for you anywhere in the Cape Town region. The panels are cast off site, so there is no mixing, no bricklaying and no waiting for cement to cure.
5.0 Stars on Google · We reply fast
Most of our new wall jobs are homeowners who want a solid boundary up quickly. We work in Durbanville, Bellville, Brackenfell, Kuils River, Parow, Goodwood, Milnerton, Table View and Kraaifontein, plus the wider Northern and Southern Suburbs. A normal house boundary is usually finished in a day or two, depending on length and ground.
One of our team will come out, walk the boundary, measure up and send you a written quote. The same crew then builds the wall, led by a team leader who knows what was quoted. Whether you want privacy, security, a pool wall or just to close off a side passage, call 078 789 2814 and we will find a time that suits you.
What is included in a new wall installation
- 01Free site visit and measure
- We walk the boundary with you, check the ground, note slopes, trees and services, and measure the full length so the quote is spot on.
- 02Posts and panels supplied
- Posts and precast panels come from us in the height and style you pick. You do not need to run to a builders yard for anything.
- 03Post holes and concrete footings
- Every post goes into a properly dug hole and is concreted in. That keeps the wall upright through winter rain and the south-easter.
- 04Panels fitted and levelled
- Panels slot into the posts one course at a time. We check level and line as we go, so the top of the wall runs straight.
- 05Pillars, end caps and finishing
- End posts get caps or plastered pillars where needed. The wall looks finished and rain stays out of the hollow posts.
- 06Gate openings
- We leave the right gap for a pedestrian or driveway gate and build up to your gate posts.
- 07Site clean-up
- Rubble, offcuts and spoil go when we go. You get a wall, not a mess.
Heights, styles and finishes to choose from
The main choices are height, panel style, post strength and finish. We go through the trade-offs with you, so you only pay for what the wall needs.
- Wall height from 1.2m to 2.4m
- Panels are about 300mm high, so height goes up in steps. Roughly 4 panels make 1.2m, 5 make 1.5m, 6 make 1.8m, 7 make 2.1m and 8 make 2.4m. Most people go for 1.8m for privacy, and some go higher on the street side.
- Panel style
- Smooth panels give a clean, modern look. Rock-face panels have a stone-like texture that hides marks and dust. Double-sided panels look the same from both sides, which your neighbour will appreciate.
- Standard or heavy-duty posts
- Standard posts suit most house boundaries. Heavy-duty posts are thicker and stronger. They are worth it on taller walls, retaining situations and exposed or coastal sites where the wind hits harder.
- Painted or unpainted
- Unpainted walls stay natural concrete grey and need no upkeep. If you want a colour to match the house, we can paint after installation. A painted wall looks sharp but will need a fresh coat down the line.
- Pillars and end caps
- Plastered pillars at corners, ends or gates give the wall a solid, finished look. Plain end caps cost less and still keep water out.
- Gate openings
- Tell us the gate width and type before we start. We set the posts so a sliding or swing gate fits properly, and we can point you to a gate supplier if you need one.
Prices 2026
How much does it cost?
Vibracrete walls are priced per metre installed, and the price rises with height. The prices below are typical Cape Town ranges and work as a guide. The final figure comes once one of our team has seen the site.
| Job | Typical price (2026) |
|---|---|
| 1.2m vibracrete wall | R420 to R560per metre installed |
| 1.5m vibracrete wall | R480 to R650per metre installed |
| 1.8m vibracrete wall | R550 to R750per metre installed |
| 2.1m vibracrete wall | R750 to R950per metre installed |
| 2.4m vibracrete wall | R950 to R1 100per metre installed |
| Heavy-duty vibracrete wall (1.8m) | R800 to R950per metre installed |
- A 1.2m vibracrete wall in Cape Town costs between R420 and R560 per metre installed.
- A 1.5m vibracrete wall in Cape Town costs between R480 and R650 per metre installed.
- A 1.8m vibracrete wall in Cape Town costs between R550 and R750 per metre installed.
- A 2.1m vibracrete wall in Cape Town costs between R750 and R950 per metre installed.
- A 2.4m vibracrete wall in Cape Town costs between R950 and R1 100 per metre installed.
- A heavy-duty 1.8m vibracrete wall in Cape Town costs between R800 and R950 per metre installed.
Prices are typical Cape Town ranges including VAT where applicable. Your exact price is confirmed in a free written quote after we see the site.
See the full 2026 price guideWhat affects the price
- Wall height: each extra panel adds material, and a taller wall needs stronger posts.
- Total length: a long wall usually works out cheaper per metre than a very short one, because set-up time is spread out.
- Ground conditions: sandy Cape Flats soil digs easily. Rock, rubble or hard clay slows us down.
- Slopes and steps: on a slope, as in parts of Durbanville and Tokai, the panels are stepped. That takes more careful work.
- Post type and panel style: heavy-duty posts and double-sided panels cost more than the standard options.
- Extras: painting, plastered pillars, gate openings and removing an old wall are listed separately on the quote, so you can see what each one costs.
Step by step
How the job works
- 01
Call or send a message
Phone 078 789 2814 and tell us your suburb, the rough length and the height you want. Photos help.
- 02
Site visit and quote
One of our team comes out, measures, checks the ground and sends a written quote that spells out the options.
- 03
Choose your style and book a date
You pick the height, panel style and finish. We book a date and confirm what time the crew will arrive.
- 04
Set the posts
The crew marks the line, digs the holes and sets the posts in concrete, checking level and spacing as they go.
- 05
Slot in the panels
Once the posts are firm, the panels go in course by course. Then come the caps, pillars and gate openings.
- 06
Clean up and walk-through
We clear the site and walk the wall with you. If something is off, we come back and fix it.
How long it takes
Most new walls take one to three days on site, depending on length, height and ground. You normally have the quote within a day or two of the site visit.
- Site visit and quote
- Usually within a few days of your call
- Short boundary (up to about 20 metres)
- About 1 day on site
- Full house boundary
- About 2 to 3 days on site
- Painting or plastered pillars
- Extra day or two, weather permitting
Wall heights
See each height on a real job
New walls our teams built in Cape Town, from 1.2m to 2.4m. Use them to picture the height you need.
- 1.2m
Front walls, often with decorative top panels
- 1.5m
Gardens and yards
- 1.8m
The most popular height for privacy
- 2.1m
Back gardens with extra privacy
- 2.4m
Maximum privacy and security
Not sure which height?
WhatsApp us a photo of your boundary and we will tell you what works.
Ask on WhatsApp
Our work
Photos of our work
Why 1st Call
Why Cape Town homeowners choose us
Our crew does boundary work and nothing else, so they have put up a lot of walls and know what to look out for on a Cape Town site. The quote is in writing, with extras listed separately. We arrive when we say we will, work tidily and leave the property clean.
We have five-star Google reviews from Cape Town homeowners, and we want every new wall to earn another one. Electric fencing and carports are also on our list, so one company can handle the wall, the fence and the carport.
Areas we cover
- Durbanville
- Bellville
- Brackenfell
- Kuils River
- Parow
- Goodwood
- Milnerton
- Table View
- Kraaifontein
- Rondebosch
- Claremont
- Plumstead
- Tokai
- Northern Suburbs
- Southern Suburbs
Not listed? We work across the whole Cape Town region. See all areas.
Questions
Vibracrete Walls: frequently asked questions
More questions? Read our full FAQ or call us on 078 789 2814.
Most house boundaries take one to three days on site. A short wall of around 20 metres can often be done in a day, and a full perimeter takes longer. Rain or very hard ground can add time, and we tell you if that happens.
It depends on the height, the position and your zoning. In the City of Cape Town, boundary walls over about 2.1m, walls on a street boundary and walls in some special zones can need approval. Check with the City or your district office before building. We can tell you what we usually see in your suburb, but the owner of the property is responsible for approval.
Yes. Removing and carting away an old wall is quoted separately per metre, so you see the cost on its own. If the old wall is a sound vibracrete wall, raising it may be cheaper than starting again.
Yes. On sloping ground, such as in Durbanville or Tokai, we step the panels so the wall follows the fall of the land. We look at the slope on the site visit. On steeper ground we may suggest heavy-duty posts.
Yes, when the posts sit in proper concrete footings. These walls handle Cape Town winter rain and south-easter wind well. At exposed or coastal spots like Table View and Milnerton we recommend heavy-duty posts. Sandy soil is something we allow for when we set the footings.
Related services
Free site visit and quote
Ready for your vibracrete walls? Let's talk.
Send us the wall length, your suburb and a photo or two. We'll come out, measure up and send a clear written quote. We reply fast, Mon to Sat 07h00 to 19h00.
