SaleBlack Friday
Steel sliding driveway gate with open bars on top and closed lower panels, installed in front of a Cape Town home

Gates and Gate Automation in Cape Town

A boundary wall is only as secure as the gate in it. A strong wall with a sagging gate that will not close properly leaves the easiest way in wide open. A good gate runs smoothly, shuts tight and lets you drive in without getting out of the car.

5.0 Stars on Google · We reply fast

1st Call Vibracrete & Boundary Solutions supplies and installs steel sliding driveway gates, steel pedestrian gates and gate motors. We work across Durbanville, Bellville, Brackenfell, Kuils River, Parow, Goodwood, Milnerton, Table View and Kraaifontein.

We build and raise the walls these gates sit between, so the pillars, track and gate are planned together. Our crew handles the whole job instead of leaving you to coordinate a wall builder and a gate fitter.

What is included in a gate installation

01Site visit and measuring
We measure the opening, check the slope of the driveway and see how much room there is beside the gate for it to slide open.
02Steel gate made to size
The gate frame and infill are cut and welded to fit your opening, then galvanised or primed and painted to the finish you choose.
03Pillars and gate track
We fit or adjust the pillars and set the track level in concrete, so the gate rolls freely without dragging or jumping.
04Wheels, guides and locking
Quality wheels, top and bottom guides and a lock or catch that lines up properly every time you close the gate.
05Gate motor and remotes
If you want automation, we supply and install the motor, mount it securely and set up your remotes.
06Clean-up
Offcuts, packaging and spoil go off site, and the entrance is left tidy.

Gate and motor options

We keep the range simple: steel sliding gates for driveways, steel pedestrian gates for walk-in access, and motors for the sliding gates. We go through the choices on site so you pick what fits your property and your budget.

Steel sliding driveway gate
A sliding gate runs along the inside of your wall on a track. It suits driveways where there is no room to swing a gate open, and it is the best base for a motor.
Steel pedestrian gate
A separate walk-in gate beside the driveway, so the family and visitors do not have to open the big gate every time.
Gate motor, supplied and installed
We automate sliding gates, so you open and close from the car with a remote. We set up the remotes and show you how the manual release works.
Battery backup for load-shedding
A motor with a battery lets the gate keep working when the power is off. Without one, you can only use the manual release, which is a poor way to spend a winter evening in the dark.
Galvanised or painted finish
Galvanising helps steel resist rust, which matters near the sea in Table View and Milnerton. Painted steel lets you match your house colours but needs a touch-up now and then.
Infill style
Choose from open bars for a view of the street or closed sheeting for privacy. Closed gates give more privacy but catch more wind.

Prices 2026

How much does it cost?

The prices below are a guide for a standard gate job in Cape Town. Your final quote depends on the width of the opening, the finish and the state of the pillars. We confirm it in writing after a site visit.

Typical Cape Town prices for 2026
JobTypical price (2026)
Steel sliding driveway gateR9 000 to R25 000supplied and installed
Steel pedestrian gateR2 500 to R7 500supplied and installed
Sliding gate motorR6 500 to R12 000supplied and installed
  • A steel sliding driveway gate in Cape Town costs between R9 000 and R25 000 supplied and installed.
  • A steel pedestrian gate in Cape Town costs between R2 500 and R7 500 supplied and installed.
  • A sliding gate motor in Cape Town costs between R6 500 and R12 000 supplied and installed.

Prices are typical Cape Town ranges including VAT where applicable. Your exact price is confirmed in a free written quote after we see the site.

See the full 2026 price guide

What affects the price

  • Width and height of the gate, and how much steel goes into it.
  • Galvanised steel costs more than painted steel but lasts longer near the coast.
  • Open bars or closed sheeting for the infill.
  • Whether the pillars and track are already in place or need building or fixing.
  • Motor size, battery backup and the number of remotes.
  • Slope and ground, for example a driveway that falls away or hard rock under the track.

Step by step

How the job works

  1. 01

    Call us and tell us what you need

    Phone 078 789 2814 and tell us your suburb, whether you want a driveway gate, a pedestrian gate or a motor, and what is in place now.

  2. 02

    Site visit and measurements

    One of our team comes out, measures the opening and checks the pillars, the ground and the room for the gate to slide.

  3. 03

    Free written quote

    You get a written quote that lists the gate, the finish, the motor and any pillar or track work separately.

  4. 04

    Gate made and track prepared

    The steel is cut and welded to size while we prepare the pillars and set the track in concrete.

  5. 05

    Gate hung and motor fitted

    We hang the gate, adjust it until it runs freely, then mount the motor and set up the remotes and battery if you chose them.

  6. 06

    Final walk-through and clean-up

    We run the gate with you, show you the manual release and clear the site before we leave.

How long it takes

Most gates are made in a few days and installed in a day or two. Pillar work and wet weather can add time.

Site visit and written quote
Usually within a few days of your call
Gate fabrication
About one week, depending on size and finish
Track and pillar work
One to two days, plus time for the concrete to set
Gate and motor installation
One day for most sliding gates and motors

Our work

Photos of our work

  • Steel sliding gate beside a white plastered pillar and low block wall with steel palisade on top, over a brick-paved driveway
  • White plastered block wall with steel palisade panels and a steel sliding driveway gate on Horak Street, Cape Town
  • Plastered and painted block wall with taupe pillars, horizontal steel slat panels and electric fence on Perth Road, Cape Town

Why 1st Call

Why Cape Town homeowners choose us

Our own crew measures, builds and installs, so your gate is not passed along a chain of subcontractors. Because we also build the walls, we get the pillars and track right the first time, and the gate lines up with the rest of your boundary. Quotes are in writing and extras are listed separately.

We have five-star reviews on Google from Cape Town homeowners. If your wall needs raising or an electric fence on top to go with the new gate, we can do that in the same visit. Call 078 789 2814, Monday to Saturday, 07h00 to 19h00. We reply fast.

Areas we cover

Not listed? We work across the whole Cape Town region. See all areas.

Questions

Gates and Automation: frequently asked questions

More questions? Read our full FAQ or call us on 078 789 2814.

No. We supply and install steel sliding driveway gates and steel pedestrian gates, with motors for the sliding gates. If you are not sure a sliding gate fits your driveway, our team can check the space on site.

New 2.1m precast vibracrete wall along a green lawn on a sunny Cape Town day

Free site visit and quote

Ready for your gates and automation? Let's talk.

Send us the wall length, your suburb and a photo or two. We'll come out, measure up and send a clear written quote. We reply fast, Mon to Sat 07h00 to 19h00.